2
2-52
Making Prints Using the Stack Bypass
NOTE
•
If you make a mistake when entering values, press [C] on the touch panel display
© enter the correct values.
•
To enter values in millimeters, press [mm].
•
When entering values in millimeters, you can also use
(Clear) to clear your entries.
•
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
•
For instructions on entering values in inches, see "Values in Inches," on p. 2-33.
•
To select a paper size stored in a size key ([S1] to [S5]), you need to store the
irregular paper size in the size key beforehand. For instructions on storing irregular
paper sizes, see "Irregular Paper Size Settings for the Stack Bypass," on p. 4-58.
•
[Register] on the Enter an Irregular Size screen is a shortcut key to the Registering
Irregular Size for Stack Bypass mode in Common Settings (from the Additional
Functions screen).
❑
Press [Next].
-
(numeric keys), and