List Of Error Messages; List Of Error Codes Without Messages - Canon imagePRESS C1+ User Manual

List of Error Messages

This section explains the various messages that appear on the touch panel display, along with
possible causes and remedies.
For explanations of messages that are not listed here, see the Sending Guide and Network Guide .

List of Error Codes without Messages

If a job or operation does not complete successfully, check the error code, and perform the necessary
operations according to the error code displayed. You can check the error code on the Details screen
under [Log] from the System Monitor screen. (See Chapter 5, "Checking Job and Device Status, " in the
Reference Guide .)
If a send or receive job does not complete successfully, the error code is printed in the Results
column on the Activity Report and Send Report. However, if a send job is cancelled, "STOP" is printed
in the Results column on the Send report. (See Chapter 11, "Printing Communication Reports, " in the
Sending Guide .)
Perform the necessary procedures according to the error code.
# 001
Cause 1 A paper jam occurred in the feeding slot of the stack bypass.
Remedy Place your originals, specify the scanning mode, and try scanning again.
Cause 2 Differently sized originals were scanned, and the Different Size Originals mode was not set.
Remedy Place your originals, specify the Different Size Originals mode, and try scanning again.
Cause 3 Differently sized originals were scanned in the 2-Sided mode, and the Different Size Originals
mode was not set.
Remedy Place your originals, specify the 2-Sided and Different Size Originals modes, and try scanning
again.

List of Error Messages

3
3-9