4
6
5
Printing Installed Application Information
You can print the MEAP application information, as well as certain system
application information.
NOTE
•
The information is printed as a print job from the printer driver. You can check the details
of this job from the System Monitor screen. (See "Job Details," on p. 5-11.)
•
The following job attributes are set when printing:
- Job Name:
- Job Client:
6-60
MEAP Settings
Select [On] or [Off] © press [OK].
If you do not want to use HTTP, press [Off].
The selected mode is set.
NOTE
This setting is enabled only after you restart the machine (the main power switch is
turned OFF, then back ON again).
Press [Done] repeatedly until the Basic Features screen
appears.
"MEAP SYSTEM INFORMATION" is always set.
The login name of the user who operates the modes from the
Additional Functions screen is set. However, this is activated only if
the user logs on via MEAP authentication.