Finisher-N1/Saddle Finisher-N2
The Finisher-N1 and Saddle Finisher-N2 are equipped with the following finishing
modes: Collate, Group, Offset, and Staple.
The Saddle Finisher-N2 is also equipped with the Saddle Stitch mode.
NOTE
3
Either the Finisher-N1 or Saddle Finisher-N2 can be attached to the main unit.
Parts and Their Functions
a a a a Top Cover
Open this cover to remove jammed paper. (See
"Finisher-N1/Saddle Finisher-N2 (Optional)," on
p. 8-53.)
b b b b Release Button
Press to move the finisher away from the main
unit.
3-22
Finisher-N1/Saddle Finisher-N2
8
7
6
5
1 2
3
4
c c c c Upper Front Cover
Open this cover to replace the staple cartridge in
the stapler unit, or to clear a staple jam. (For
instructions on how to replace the staple
cartridge, see "Replacing the Staple Cartridge in
the Stapler Unit," on p. 7-19. For instructions on
clearing a staple jam, see "Finisher-N1/Saddle
Finisher-N2 (Optional)," on p. 8-53.)