NOTE
If paper runs out during copying or printing, load a new paper stack, and follow the
instructions on the touch panel display. The machine automatically restarts, and
produces the remaining copies or prints.
Adjusting a Paper Drawer to Hold a Different Paper Size
If you want to load a different paper size into a paper drawer, follow the procedure
described below to adjust the paper drawer guides.
IMPORTANT
Only LTR transparencies can be used. Make sure that the paper size slide is set to 'LTR'
when loading transparencies in a paper drawer. If transparencies of a different size (other
than LTR) are loaded in a paper drawer, the paper size and remaining amount of paper
will not be detected correctly.
1
Press and release the button on the paper drawer that you
want to adjust. Grip the handle, and pull out the paper drawer
until it stops. Remove all of the remaining paper.
Paper Drawers
7-7
7