2
2-48
Making Prints Using the Stack Bypass
G If you are loading envelopes into the stack bypass:
❑
Take five envelopes, loosen them as shown, and then stack them together.
Repeat this step five times for each set of five envelopes.
❑
Place the envelopes on a clean, level surface, and press all the way around the
envelopes by hand, in the direction of the arrows, to remove any curls. Repeat
this step five times for each set of five envelopes.
IMPORTANT
Take particular care to spread the envelopes out in the direction that they will be
fed.
❑
Hold down the four corners of the envelopes firmly, so that they and the sealed
or glued portion stay flat.
Flap