5
Select the desired paper type © press [OK].
NOTE
•
[Transparency] can be selected only if [LTR] is selected as the paper size.
•
If you select [Envelope], [Transparency], [Tracing Paper], [Labels], [Tab Paper] or
[Washi (JPN paper)], make sure that you do not specify any Finisher modes
(Collate, Group, or Staple).
•
For more information on paper types, see "Available Paper Stock," on p. 2-60.
6
Press [OK].
The selected mode is set.
7
Press [Done] repeatedly until the Basic Features screen
appears.
Specifying Common Settings
4
4-57