2
Press [M] or [L] to enter the desired Auto Sleep Time ©
press [OK].
The Auto Sleep Time can be set from 10, 15, 20, 30, 40, 50 minutes, 1 hour, 90
minutes, 2, 3, and 4 hours.
The selected mode is set.
3
Press [Done] repeatedly until the Basic Features screen
appears.
Auto Clear Time
If the machine is idle for a certain period of time (after the last print job or key
operation is performed), the display returns to the Basic Features screen (standard
settings) of the selected function. This period of time is called the "Auto Clear
Time."
The Auto Clear Time can be set from 0 to 9 minutes in one minute increments, and
can also be set to 'Off'.
NOTE
•
If '0' is selected, the Auto Clear Time mode is not set.
•
The default setting is '2' minutes.
Timer Settings
4-85
4