A screen informing you that the staples are being repositioned appears.
When the machine is finished repositioning the staples, the message <Finished
repositioning staples.> appears for approximately two seconds on the touch panel
display.
3
Press [Done] repeatedly until the Basic Features screen
appears.
Saddle Stitch Position Adjustment
If you are using the Saddle Stitch mode of the optional Saddle Finisher-N2, and you
notice that the folds of the paper are not exactly in the middle of the booklet, you
can make adjustments to the saddle stitch position to compensate for this error.
IMPORTANT
The saddle stitch position can only be adjusted if the optional Saddle Finisher-N2 is
attached.
Adjusting the Machine
4
4-95