Remove the original from the feeder.
Cause
Remedy
Original scanning area (thin glass strip) is dirty.
Cause
Remedy
List of Error Codes without Messages
If a job or operation does not complete successfully, check the error code, and
perform the necessary operations according to the error code displayed. You can
check the error code on the Details screen when you press [Log] on the System
Monitor screen. (See "Copy/Print Job Details," on p. 5-8.)
If a fax job does not complete successfully, the error code is printed in the Results
column on the Activity Report and Send Report. However, if a send job is canceled,
"STOP" is printed in the Results column on the Send Report. (See Chapter 7,
"Printing Communication Reports," in the Facsimile Guide.)
8
Perform the necessary procedures according to the error code.
# 001
Cause
Remedy
# 009
Cause 1
Remedy
Cause 2
Remedy
8-66
List of Error Messages
The machine cannot scan your original using the feeder. An original is placed in
the feeder and on the platen glass.
Remove the original from the feeder.
The feeder's scanning area is dirty.
Clean the feeder's scanning area. (See "Manual Feeder Cleaning," on p. 7-42.)
Paper or originals are jammed.
Remove any jammed paper or originals. (See "Clearing Paper Jams," on p. 8-3,
and "Feeder (DADF-N1) (Optional)," on p. 8-29.)
There is no paper.
Load paper. (See "Paper Drawers," on p. 7-2.)
The paper drawer is not inserted correctly.
Insert the paper drawer properly. (See "Paper Drawers," on p. 7-2.)