Platen Glass and Cover
Clean the platen glass and the underside of the optional platen cover by following
the procedure below.
IMPORTANT
•
If the platen glass or the underside of the optional platen cover is dirty, the original may
not be scanned clearly, or the size of the original may be detected incorrectly.
•
This procedure is necessary only if the optional Color Image Reader-C1 and Platen
Cover Type G are attached.
1
Clean the platen glass and the underside of the optional
platen cover with a cloth dampened with water, and wipe them
with a soft, dry cloth.
CAUTION
Do not dampen the cloth too much, as this may damage the original or
break the machine.
Routine Cleaning
7-39
7