3
Press [On] © select the desired language © press [OK].
If the desired language is not displayed, press [M] or [L].
If you do not want to change the display language, press [Off].
The touch panel display language changes to the selected language.
4
Press [Done] repeatedly until the Basic Features screen
appears.
IMPORTANT
•
Some messages may not be displayed properly in the language that you just
selected. In this case, restart the machine (turn the machine OFF, then back ON
again).
•
If SSO is set as the login service, and there is a difference between the language
set on the machine and the one set in Active Directory, the sender's full name will
not be displayed in the e-mail message on the recipient's machine.
Specifying Common Settings
4
4-69