4
4
Full Adjustment
IMPORTANT
•
Make sure that you place the test prints properly. Accurate recalibrations of the gradation,
density, and color settings of the machine cannot be made if the test prints are not
scanned correctly.
•
Three test prints are output by the machine during this adjustment. Make sure that a
sufficient supply of 11" x 17" or LTR of the selected paper type is loaded into the machine
before starting this procedure.
NOTE
Test prints are not counted as part of the copy or print total page counts.
4-100
Adjusting the Machine
When the machine is finished adjusting the gradation settings, the message
<Quick adjustment complete.> appears for approximately two seconds on the
touch panel display.
Press [Done] repeatedly until the Basic Features screen
appears.