Channel 3/4 Position "Ch3","Ch4 - FUTABA 1M23N20718 Instruction Manual

Channel 3/4 position "CH3","CH4"

The channel 3/4 servo position can be set from the transmitter. When CH3 is assigned
to a dial by the dial function (p.90), this setting is linked to that dial.
When CH3/4 is not assigned to a dial, it can be set with this screen.
When CH3/4 is assigned to a switch by the switch function (p.88), you cannot adjust the
CH3/4 via the screen.
Calling the setup screen
*Calling from menu screen
(Opening Screen)
Menu screen call
by
MENU 1
MENU1/2 selection
by button
MENU 2
Select the function
by button
Press t
he button
* When the direc t c all but ton
is set, the setup screen is also
called by the following method:
(Opening Screen)
Press t
he
DIRECT SEL
Press the button set
at this function.
Channel 3/4 adjustment
1
(Position adjustment)
Use the (+) and (-) buttons to adjust the channel 3 or chan-
nel 4 position.
2
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
* b l i n k s a t t h e c u r r e n t
setup item.
button
button
Channel 3/4 position "CH3","CH4"
(3rd or 4th channel system)
button
Setup Item
CH3 POSI :Channel 3 position
CH4 POSI :Channel 4 position
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons
simultaneously (approx. 1 sec)
to return to the initial screen
Channel 3 position (POSI)
Channel 4 position (POSI)
0~100%
Initial value: 100%
121