Adjuster "Adjst - FUTABA 1M23N20718 Instruction Manual

Adjuster "ADJST"

Steering and throttle correction can be applied. Use this function when a mechanical
offset has occurred for some reason.
Calling the setup screen
*Calling from menu screen
(Opening Screen)
MENU 1
MENU 2
Press t
* When the direc t c all but ton
is set, the setup screen is also
called by the following method:
(Opening Screen)
DIRECT SEL
Press the button set
at this function.
Steering adjustment
(Preparation)
In the steering side selected state, select the adjustment
screen by pressing the (JOG) button.
1
(Steering neutral adjustment)
In the neutral setup screen (figure at the right) state, lightly
pull the steering wheel and then press the (JOG) button in
the state in which the wheel is not being touched.
2
(Steering throw adjustment)
In the throw setup screen (figure at the right) state, lightly
turn the wheel fully to the left and right and press the (JOG)
button.
3
(Correction execution)
At the check screen, and press the (+) and (-) buttons simul-
taneously.
116
Menu screen call
by button
MENU1/2 selection
by button
Select the function
by button
he button
Press t
he button
However, if correction was applied, it may be
necessary to recheck the set values of all the set-
up functions.
button
* b l i n k s a t t h e c u r r e n t
setup item.
Adjuster "ADJST"
Throttle
Steering