Atl Function "Atl - FUTABA 1M23N20718 Instruction Manual

Throttle ATL Function "ATL"
This function decreases the set value when the braking effect is strong and increases the
set value when the braking effect is weak.
This function is linked to transmitter grip dial DL2. When DL2 is assigned another
function, this function can be set with this screen.
Operation
Calling the setup screen
*Calling from menu screen
(Opening Screen)
MENU 1
MENU 2
Press t
* When the direc t c all but ton
is set, the setup screen is also
called by the following method:
(Opening Screen)
DIRECT SEL
Press the button set
at this function.
ATL function adjustment
1
(Brake amount adjustment)
Use the (+) and (-) buttons to adjust the brake amount.
Adjust the - side when the braking effect is strong and the + side when the
braking effect is weak.
2
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
120
The throttle brake side (when the throttle is pushed forward)
brake amount can be adjusted.
Menu screen call
by button
MENU1/2 selection
by button
Select the function
by button
he button
Press t he button
Throttle ATL Function "ATL"
(Throttle system)
Setup Item
RATE :Brake amount
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons
simultaneously (approx. 1 sec)
to return to the initial screen
Brake amount (RATE)
0~100%
Initial value: 100%