FUTABA 1M23N20718 Instruction Manual page 41

Customizing all functions.
In addition to the menu types shown page 38, there is ALL-
OFF. It is convenient when customizing all functions.
1
Call the menu screen from the initial screen by (JOG) button
up, down, left, or right operation.
2
On the MENU1 screen, move the cursor to "*MENU-T" by
(JOG) button up, down, left, or right operation and press the
button.
3
(Menu type selection)
After the MENU TYPE screen is displayed, select the setting
item "TYPE" with blinking cursor by (JOG) button up or down
operation. Change "TYPE" by pressing (+) or (-) buttons.
Example-select "ALLOFF".
4
(Menu type modification)
Select "EXEC" with blinking cursor by (JOG) button up or
down operation. Press the (+) and (-) buttons simultaneously
for 1 second.
- Operation is completed when "COMPLETE!" blinks on the screen.
5
Return to the menu screen by pressing the (END) button.
Use the (+) button to select the MENU1 or MENU2 menu
screen to be edited.
6
Press the (-) button for about 1 second. A confirmation peep-
ing sound is generated and the menu customize screen is
displayed.
See steps 4 and 5 on page 40 for a description of the menu
assignment method.
Note:
This function consists of 3 fixed functions; *M-SEL (model select), *M-RES
(model reset), and * MENU-T (menu type select), and cannot be moved or de-
leted.
When the menu type is changed from the created customize menu to another
menu type by * MENU-T, the customize menu is reset and the menu is initial-
ized to the original menu.
The set values of a function deleted from the menu remain valid. When an un-
used function is turned OFF or rate adjustment, etc. related to other functions is
performed, check the set values before deleting the function.
(Opening Screen)
(MENU1 screen)
Pre
or
Pre
(MENU TYPE screen)
Pre
and
Pre
Pre
Pre
(MENU1 screen)
Pre
(MENU2 screen)
(approx. 1sec)
Pre Pre
(CUSTOMIZE MENU screen)
41