Channel 3 Position - FUTABA 3PJ Super Instruction Manual

Use this function to set the servo position of the channel 3.
This setting is linked to transmitter KNOB. When KNOB is assigned to another func-
tion, set the channel 3 position with this screen.
1. Call the Set-Up mode screen
by pressing the UP and
DOWN keys simultaneously
at the initial screen.
2. Call the Channel 3 Position
screen by pressing the UP or
DOWN keys in function map
order.
3. Adjust the servo position with
the + or - key.
4. At the end of adjustment,
press the UP and DOWN
keys simultaneously. Or
press the DIRECT key twice.
(The display returns to the ini-
tial screen.)

Channel 3 Position

DIRECT ST.EXP M.SEL
UP +
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
- Return to the initial value (50%)
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
by pressing the + and - keys si-
-
SELECT DOWN
TH.EXP ATV CUSTOM
multaneously for about one sec-
ond.
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
Setting range: 0~100%
79