FUTABA 1M23N20718 Instruction Manual page 53

Table of Contents

Advertisement

Throttle acceleration adjustment
(Preparation)
- Select the setting item "FWRD" by (JOG) button up or down
operation and make the following adjustments:
1
(Forward acceleration amount adjustment)
Use the (+) and (-) buttons to adjust the acceleration amount.
"0"
:No acceleration
"100"
:Maximum acceleration (Approximately 1/2 of the forward side
throttle angle)
2
(Brake side acceleration amount adjustment)
Select the setting item "BRAK" by (JOG) button up or down
operation and use the (+) and (-) buttons to adjust the accel-
eration amount.
"0"
:No acceleration
"100"
:Maximum acceleration (Brake side maximum throttle angle)
3
(3rd & 4th channel brake side acceleration amount adjustment)
If the "Brake Mixing Function" (see page 74) is being set, the
3rd or 4th channel brake side acceleration will become ad-
justable.
Select the setting item"BRAK (3CH)" or "BRAK (4CH)" by
(JOG) button up or down operation and adjust acceleration
amount by (+) or (-) button.
"0"
:No acceleration
"100"
:Maximum acceleration (Brake side maximum throttleangle)
4
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
3rd channel Brake
Caution
When "TRG-BRK" is set to "CUT OFF" by boat mode function (p.78), the brake side
function is not activated.
Dial / Trim Setting
The throttle acceleration adjustment amount (FOWRD), (BRAKE), 3rd channel
(BRAKE 3CH) and 4th channel (BRAKE 4CH) can be controlled with digital dial
DL1, DL2, DL3 or digital trim DT3 etc. with the function select dial function. (p.90)
4th channel Brake
Throttle Acceleration "ACCEL"
Adjust button
Adjust with the (+) and (-) but-
tons.
- Return to the initial value "0" by
pressing the (+) and (-) buttons
simultaneously for about 1 sec-
ond.
Forward acceleration amount
(FWRD)
0~100
Initial value: 0
Brake side acceleration amount
(BRAK)
0~100
Initial value: 0
3rd/4th channel brake side
acceleration amount
(BRAK 3CH),(BRAK 4CH)
0~100
Initial value: 0
3rd & 4th channel Brake
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

4pk-2.4g

Table of Contents