About Transmitter Antenna And Receiver; About Transmitter Antenna; Receiver Nomenclature - FUTABA 1M23N20718 Instruction Manual

About Transmitter Antenna and Receiver

About The Transmitter Antenna
to the ground.
Warning
Otherwise, the operating range may become shorter.
Never hold only the antenna.
Hold the grip handle. Otherwise, the antenna may be damaged.
The antenna position can be changed in the range as shown in figures A and B. However, please
do not apply unnecessary force or shock.
The internal cable may be damaged; thus transmitting distance decreases and it may cause malfunction.
cept when it must be replaced.
If the transmitter antenna terminals get dirty, the radio wave output will become weak and there is the danger that the
receiving range will be substantially shortened.
When the antenna is changed, it requires the metal
part of the antenna to be held firmly while putting it
on.
The antenna cannot be mounted to T4PKS (by rotating the middle
part of the antenna).
There might be small glitch when the antenna
of the transmitter is brought close to servos,
ESCs or other peripheral devices.
This is not an issue but please keep this symp-
tom in mind, especially when setting-up.
28
Antenna
A
Antenna Moving Range
Antenna
W h e n t h e a nte n n a i s
changed, it requires the
m et a l p ar t of t h e a n -
tenna to be held firmly
while putting it on.
B
-