Programmable Mixes 1/2 "P-Mix - FUTABA 1M23N20718 Instruction Manual

Table of Contents

Advertisement

Programmable Mixes (1, 2 ) "P-MIX"
These functions allow you to apply mixing between the steering, throttle, channel 3 and
channel 4.
Two programmable mixing systems can be used. The programmable mixing 1 and pro-
grammable mixing 2 set-up screens are independent.
Additional Functions
-When the steering or throttle channel is the master channel (channel that applies mix-
ing), trim data can be added. (Trim mode)
- The mixing mode selection. (Master mixing mode)
- The master channel mixing center point (point at which the direction changes) can be
offset. (Offset function)
Movement of the slave channel side
The movement of the master channel side will be added to the movement of the slave
channel side.
When "TRG-BRK" was set to "CUT OFF" by boat mode function
When "CUT OFF", which prohibits trigger brake side operation, was set in the boat
mode (p.78), since brake side operation is shut off, when the master channel (MST) is
set to throttle, only "FWRD" side mixing is activated. "BRAK" side mixing is not acti-
vated.
Calling the setup screen
*Calling from menu screen
(Opening Screen)
Menu screen call
by
MENU 1
MENU1/2 selection
by
button
MENU 2
Select the function
by
button
Press t
he
button
* When the direc t c all but ton
is set, the setup screen is also
called by the following method:
(Opening Screen)
Press t
he
DIRECT SEL
Press the button set
at this function.
* b l i n k s a t t h e c u r r e n t
* b l i n k s a t t h e c u r r e n t
setup item.
button
button
These setup items are different de-
pending on the master channel.
Upper side : LEFT/FWRD/UP
Lower side : RGHT/BRAK/DOWN
Programmable Mixes1, 2 "PMIX1, 2"
button
button
setup item.
(All channels)
Setup items
MENU
: MIX 1 or 2
LEFT
: Mixing rate (Left side)
RGHT
: Mixing rate (Right side)
MST
: Master channel
SLV
: Slave channel
MODE
: Function ON/OFF
OFST
: Offset
MXMD
: Mix mode
TRIM
: Trim mode
Adjust button
- Adjust with the (+) and (-) but-
tons.
- Return to the initial value "100"
by pressing the (+) and (-) but-
tons simultaneously for about 1
second.
83

Advertisement

Table of Contents
loading

This manual is also suitable for:

4pk-2.4g

Table of Contents