Table of Contents
Advertisement
Throttle ATL adjustment
1
(ATL position adjustment)
Use the (+) and (-) buttons to adjust the ATL position.
- This position is linked with the grip lever (DT4).
2
When ending adjustment, return to the initial screen by pressing the (SEL)
button.
Channel 3 Position / CH3
Use this function to set the servo position of the channel 3.
This setting is linked to transmitter switch (SW2). When the switch is assigned to
another function, set the channel 3 position with this screen.
Calling the setup screen
(Initial screen)
Press "SEL" key to select the
desired function screen.
Channel 3 adjustment
(Preparation)
- Select setup item "CH3" and make the following ad-
justments.
1
(Position adjustment)
Use the (+) and (-) buttons to adjust the channel
3 position.
- This position is linked with the switch (SW2).
2
When ending adjustment, return to the initial
screen by pressing the (SEL) button.
Setup Item
ATL-BK: Throttle ATL position
ATL position
0 ~ 100%
Initial value: 100%
(Setup screen)
Channel 3
position
Setup Item
RATE: Channel 3 posiion
Adjustment buttons
- Use the (+) and (-) buttons to make
adjustments.
- Press the (+) and (-) buttons simulta-
neously (approx. 1 sec) to return to the
initial screen.
When channel 3 switch is operated,
the "CH3" screen is displayed
automaticaly for about three seconds.
Channel 3 position
L.F.U 100% ~ 0 ~ R.B.D 100%
Initial value: 0%
Adjustment buttons
- Use the (+) and (-) buttons to make
adjustments.
- Press the (+) and (-) buttons simulta-
neously (approx. 1 sec) to return to
the initial screen.
45
Advertisement
Table of Contents
