Throttle Speed "Thspd - FUTABA 1M23N20718 Instruction Manual

Throttle Speed "THSPD"

Sudden throttle trigger operation on a slippery
road only causes the wheels to spin and the ve-
hicle cannot accelerate smoothly. Setting the
throttle speed function reduces wasteful battery
consumption while at the same time permitting
smooth, enjoyable operation.
Operation
-Throttle servo (ESC) operation is delayed so that the drive wheels will not spin even
if the trottle trigger is operated more than necessary. This delay function is not per-
formed when the throttle trigger is returned and at brake operation.
-1 speed, 2 speed, or 3 speed can be selected.
neutral
high
ALL
1 SPEED
A delay is set over the entire
throttle range.
Calling the setup screen
*Calling from menu screen
(Opening Screen)
Menu screen call
by
MENU 1
MENU1/2 selection
by button
MENU 2
Select the function
by button
Press t
he button
* When the direc t c all but ton
is set, the setup screen is also
called by the following method:
(Opening Screen)
Press t
he
DIRECT SEL
Press the button set
at this function.
high
2 SPEED
A delay can be set in 2 ranges
with TGP1 as the boundary.
* b l i n k s a t t h e c u r r e n t
setup item.
button
button
Mode selection
One speed, 2 speed, or 3 speed can be selected at the "MODE"
item. The setting item (screen) depends on the mode. The figure at
the above is the 3 speed setup screen.
Throttle Speed "THSPD"
With "THSPD": Quick start without skidding
Without "THSPD": Slow start due to skidding
neutral
LOW
TGP1
HIGH
button
(Throttle system)
neutral
high
LOW
TGP2 TGP1
MID
HIGH
3 SPEED
A delay can be set in 3 ranges with
TGP1 and TGP2 as the boundaries.
63