Servo Reverse "Rev - FUTABA 1M23N20718 Instruction Manual

Servo Reverse "REV"

This function reverses the direction of operation of the servos related to transmitter
steering, throttle, channel 3, and channel 4 operation.
However, when the position set by trim or subtrim shifts from
the center, the center becomes the opposite side.
Calling the setup screen
*Calling from menu screen
(Opening Screen)
Menu screen call
by
MENU 1
MENU1/2 selection
by button
MENU 2
Select the function
by button
Press t
he button
* When the direc t c all but ton
is set, the setup screen is also
called by the following method:
(Opening Screen)
Press t
he
DIRECT SEL
Press the button set
at this function.
Servo Reverse Function Setting
(Preparation)
Select the channel to be set by (JOG) button left or right op-
eration. ST, TH, CH3 and CH4 on the screen blink.
1
(Servo reverse setting)
Use the (+) or (-) button to reverse the servo operation direc-
tion.
(Each channel can be set similarly.)
2
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
* blinks at the current setup
* b l i n k s a t t h e c u r r e n t
channel.
setup item.
button
button
Servo Reverse "REV"
button
(All channel)
Channel
ST :Steering
TH :Throttle
CH3 :Channel3
CH4 :Channel4
Normal side
Reverse side
Channel selection
- Select by (JOG) button left or
right operation.
Select button
- Select with the (+) or (-) but-
tons.
47