Engine Removal/Installation - KYMCO FILLY LX 50 Service Manual

6

. ENGINE REMOVAL/INSTALLATION

FILLY LX 50
ENGINE REMOVAL
Disconnect the battery negative cable.
Remove the frame body cover. ( 2-3)
Disconnect the spark plug high tension wire.
Disconnect the auto bystarter wire connector.
Disconnect the A.C. generator wire
connector.
Negative Cable
Auto Bystarter Wire Connector
Disconnect the starter motor cable and earth
cable from the starter motor.
Remove the fuel tube.
Starter Motor Cable
Earthr Cable
fuel tube
Remove the spark plug cap.
Spark Plug High Tension Wire
Vacuum Tube
Band
Disconnect the vacuum tube.
Loosen the throttle cable adjusting nut and
lock nut, and disconnect the throttle cable
from the carburetor.
Adjusting Nut
Lock Nut
6-2