Service Precautions - KYMCO X -Town 125 ABS Service Manual

1. GENERAL INFORMATION

SERVICE PRECAUTIONS

 Make sure to install new gaskets, O-rings,
circlips, cotter pins, etc. when
reassembling.
 When tightening bolts or nuts, begin with
larger-diameter to smaller ones at several
times, and tighten to the specified torque
diagonally.
 Use genuine parts and lubricants.
 When servicing the motorcycle, be sure to
use special tools for removal and
installation.
 After disassembly, clean removed parts.
Lubricate sliding surfaces with engine oil
before reassembly.
1-3
 Apply or add designated greases and
lubricants to the specified lubrication
points.
 When two persons work together, pay
attention to the mutual working safety.
 Disconnect the battery negative (-)
terminal before operation.
 When using a spanner or other tools,
make sure not to damage the motorcycle
surface.
 After operation, check all connecting
points, fasteners, and lines for proper
connection and installation.
 When connecting the battery, the positive
(+) terminal must be connected first.
 After connection, apply grease to the
battery terminals.
 Terminal caps shall be installed securely.
 If the fuse is burned out, find the cause
and repair it. Replace it with a new one
according to the specified capacity.
X -Town 125 ABS/ CBS