Day / Night Service Starting Time - Panasonic KX-TD1232 Program Manual

[102] Day / Night Service Starting Time

Description
Sets the starting time on a day of the week basis, when automatic day / night switching is
programmed in program [101] Day / Night Service Switching Mode.
Selection
• Day of the week selection number:
1 (Sunday) / 2 (Monday) /3 (Tuesday) / 4 (Wednesday) /
5 (Thursday) / 6 (Friday) / 7 (Saturday) /
• Hour: 1 through 12 / Disable (no switching)
• Minute: 0 through 59
• AM / PM
Default
Every day of the week — Day — 9:00 AM / Night — 5:00 PM
Programming
1. Enter 102.
Display: 102 DAY/NT CLOCK
2.
Press NEXT.
Display: Day of Week?
3. Enter the day of the week selection number.
To select Sunday, you can also press NEXT.
Display example: Sun-Day: 9:00 AM
To select night mode, press NEXT.
Display example: Sun-Nig: 5:00 PM
4.
Enter the hour.
To set no switching, keep pressing SELECT until "Disable" is displayed and go to step
9.
If SELECT is pressed, the display shows the previous entry. If the previous setting was
"Disable", press SELECT to enter the starting time.
To change the current entry, press CLEAR and enter the new time.
5. Press
6. Enter the minute.
To change the current entry, press CLEAR and enter the new minutes.
7.
Press
8.
Press SELECT for AM or PM.
9. Press STORE.
Programming Guide
.
.
(every day of the week)
General Programming
61