General Programming
[340] TIE Line Routing Table
Description
The TIE line routing table can be programmed. This table is referenced by the system to
identify the outside (CO) line route, when an extension user makes a TIE call.
A routing pattern appropriate for each call is decided by the first three digits (except the TIE
line access code) of the dialed number. This program assigns the TIE line access code and
outside line group hunt sequence.
Selection
• Location number: 01 through 32
• TIE line access code: 1 to 3 digits
• Outside line group hunt sequence number: 1 through 8 (5 entry max.)
Default
All locations – Not stored
Programming
1.
Enter 340.
Display example: 340 TIE ROUTE
2.
Press NEXT.
Display: Location NO?
3.
Enter a location number.
To enter location number 01, you can also press NEXT.
Display example: 01:
4.
Enter a TIE line access code.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
5.
Press
6.
Enter an outside line group hunt sequence number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
7.
Press STORE.
8.
To program another location, press NEXT or PREV, or SELECT and the desired location
number.
9.
Repeat steps 4 through 8.
10.
Press END.
164
to program the outside line group hunt sequence number.
Programming Guide