General Programming
[133] Caller ID Extension Assignment
Description
Assigns which KX-TD171 port receives Caller ID information.
Selection
• Unit (TD171) number:
KX-TD816 — 1
KX-TD1232 — 1 through 4
• Port number:
1 or 2
Default
Not stored
Programming
1.
Enter 133.
Display: 133 EXT CALL ID
2.
Press NEXT.
Display example: EXP NO?
3.
Enter a unit number.
To enter unit number 1, you can also press NEXT.
Display example: E1:Not Stored
4.
Enter a port number.
Display example: E1:Port1
5.
Press STORE.
6.
To program another unit, press NEXT or PREV, or SELECT and the desired unit number.
7.
Repeat steps 4 and 5.
8.
Press END.
Conditions
• For the KX-TD1232, unit numbers 1 and 2 are for the Master system and 3 and 4 are for the
Slave system.
• The Caller ID information can only be sent to port 1 or 2 on the unit.
• A single line telephone, connected in parallel with a digital proprietary telephone using the
XDP feature, can receive Caller ID information. But one connected in parallel with an
analog proprietary telephone cannot receive the information.
• Caller ID information is for outside calls only. Call information transferred by the Call
Forwarding, IRNA, and Station Hunting features can be sent to the destination extension.
112
Programming Guide