Time (Day/Night/Lunch) Service Start Time; Operator Assignment - Panasonic KX-TA624 Installation Manual

4.2 System Programming

[007] Time (Day/Night/Lunch) Service Start Time

Sets the starting time on a week day basis, when "Automatic" is selected in program [006]
"Time (Day/Night/Lunch) Service Changing Mode".
0 0
hour
(1···12)
* To assign every day of the week to one selection, press the
1
* 2 If the SELECT button is pressed, the display will show the previous entry. If the previous
setting was "None", press the SELECT button to enter the starting time. If you do not
need to change the time service, keep pressing the SELECT button until "None" is
displayed. For example, if Monday's day mode is set to "None", the day mode will not be
turned on Monday.
Default
• Feature Reference
Section 3, Features
Time (Day/Night/Lunch) Service

[008] Operator Assignment

Assigns an extension port number for the operator.
0 0
Default
• Feature References
Section 3, Features
Operator / Manager Extension, Operator Call
7
NEXT
NEXT
To go to another day of the week
* 2
or
SELECT
<If you press the SELECT button>
Everyday – Day – 9:00 AM / Night – 5:30 PM /
Lunch-S (starting) – None / Lunch-E (ending) – None
extension port no.
8
NEXT
Jack-01
or
or
PREV
(Every day) (Day/Night/
(Sun···Sat)
minute
SELECT
(00···59)
(AM/PM)
STORE
(01···24)
[007]-[008]
* 1
SELECT
Lunch-S/Lunch-E)
To go to another mode
STORE
END
button.
END
System Programming
4-9