T1 Did Cpc (In) - Panasonic KX-TD1232 Program Manual

General Programming

[703] T1 DID CPC (IN)

Description
Sets a CPC signal detection time to each T1 channel, assigned DID, on receiving a call.
This program is available for the KX-TD1232 only.
Selection
• T1 channel number:
01 through 24,
• Time:
00 through 15 ( 80 milliseconds is the actual time)
Default
All T1 channels — 02
Programming
1.
Enter 703.
Display: 703 DID CPC IN
2. Press NEXT.
Display: CH NO?
3.
Enter a channel number.
To enter a channel number 01, you can also press NEXT.
Display example: CH01:02
4. Enter a time.
To assign no time, press CLEAR.
To change the current entry, press CLEAR and enter the new time.
Display example: CH01:10
5. Press STORE.
6. To program another channel, press NEXT or PREV, or SELECT and the desired channel
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
Adjust to a setting of the connected telephone company.
Features Guide References
T1 Line
300
( =All T1 channels)
Programming Guide