General Programming
2.7 Extension Programming
[600] EXtra Device Port
Description
EXtra Device Port (XDP) allows a single line telephone to be connected to the same jack as a
digital proprietary telephone (DPT). This program assigns which jacks are XDP. The single
line telephone and DPT of the programmed jack work as independent extensions.
Selection
• Jack number:
KX-TD816 — 01 through 16,
KX-TD1232 —01 through 64,
• Disable / Enable
Default
All jacks — Disable
Programming
1.
Enter 600.
Display: 600 XDP PORT
2.
Press NEXT.
Display: Jack NO?
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
Display example: #01:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To program another jack, press NEXT or PREV, or SELECT and the desired jack
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• The eXtra Device Port feature must be assigned "Disable" for Direct Station Selection
(DSS) Console ports.
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available.
268
( =all jacks)
( =all jacks)
Programming Guide