Caller Id Assignment - Panasonic KX-TD1232 Program Manual

General Programming

[406] Caller ID Assignment

Description
Enables the Caller ID feature for the outside lines to which a Caller ID Service is offered by a
Central Office by contract.
Selection
• Outside line (CO) number:
KX-TD816 —01 through 08,
KX-TD1232 — 01 through 24,
( =all outside lines)
• Enable / Disable
Default
All outside lines — Disable
Programming
1. Enter 406.
Display: 406 CALLER ID CO
2.
Press NEXT.
Display: CO Line NO?
3. Enter an outside line number.
To enter outside line number 01, you can also press NEXT.
Display example: CO01:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To program another outside line, press NEXT or PREV, or SELECT and the desired
outside line number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• For the KX-TD1232, outside lines 01 through 12 are for the Master System and outside
lines 13 through 24 are for the Slave, if available.
• To assign all outside lines to one selection, press the
shows the contents programmed for outside line 01.
• The following programs are used to program Caller ID feature: [110] Caller ID Code Set
and [111] Caller ID Name Set.
180
key in step 3. In this case, the display
Programming Guide