Pits Programming Level - Panasonic KX-TD1232 Program Manual
Digital super hybrid system
Hide thumbs
Also See for KX-TD1232:
- User manual (226 pages) ,
- Installation manual (160 pages) ,
- Programming manual (443 pages)
Table of Contents
Advertisement
General Programming
[511] PITS Programming Level
Description
Regulates station programming, depending on the COS. This programming has two levels as
follows.
Level 1: enables all station programming.
Level 2: disables CO button programming in station programming.
Selection
• COS number: 1 through 8,
• LVL 1 / LVL 2
Default
All COS — LVL1
Programming
1.
Enter 511.
Display: 511 PITS PGM LVL
2.
Press NEXT.
Display: COS NO?
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:LVL1
4.
Keep pressing SELECT until the desired selection is displayed.
Display example: COS1:LVL2
5.
Press STORE.
6.
To program another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• The programmings assigned on level 1 have been kept even on level 2.
• If CO buttons are assigned on level 2 in station programming, the warning tone is heard, the
programming initial display appears.
• A tone pattern of CO received calls cannot be also changed on level 2.
• The programming assigned on [005] Flexible CO Button Assignment can be overwritten,
regardless of this programming.
266
( =all COS)
Programming Guide
Advertisement
Table of Contents
