General Programming
[001] System Speed Dialing Number Set
Description
Used to program the System Speed Dial numbers. These numbers are available to all extension
users. There are 500 numbers available from 000 to 499.
Selection
• Speed dial number: 000 through 499
• Telephone number: 24 digits (max.)
Default
All speed dial numbers - Not stored
Programming
1.
Enter 001.
Display: 001 SYS SPD DIAL
2.
Press NEXT.
Display: SPD Code?
3.
Enter a speed dial number.
To enter speed dial number 000, you can also press NEXT.
Display example: 000:Not Stored
4.
Enter a telephone number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To program another speed dial number, press NEXT or PREV, or SELECT and the desired
speed dial number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• Each speed dial number has a maximum of 24 digits. The valid characters are 0 through 9,
the
and # keys, and the FLASH or FLASH / RCL , PAUSE, SECRET and — (hyphen)
buttons.
-To store a flash signal, press FLASH or FLASH/RCL.
Note:
The stored flash will only be effective during a call. (Refer to Section "External Feature
Access" in the Features Guide.)
-To store a hyphen, press the "—" button.
30
Programming Guide