Did Number Assignment - Panasonic KX-TD1232 Program Manual

General Programming

[136] DID Number Assignment

Description
Assigns the Direct Inward Dialing (DID) number which is converted from the DID subscriber
number using the programs [433] DID / TIE Subscriber Number Removed Digit and
[434] DID / TIE Added Number. If the converted number matches the number assigned in
this program, it reaches the destination assigned in program [137-138] DID Extension ——
Day / Night.
Selection
• Location number: 001 through 200
• DID Number: 16 digits (max.)
Default
All locations — Not Stored
Programming
1. Enter 136.
Display: 136 DID NUMBER
2.
Press NEXT.
Display: Location NO?
3.
Enter a location number.
To enter location number 001, you can also press NEXT.
Display example: #001:Not Stored
4.
Enter a DID number.
To delete the current entry, press CLEAR and enter the new number.
To assign no number, press CLEAR.
5. Press STORE.
6. To program another location, press NEXT or PREV, or SELECT and the desired location
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• There is a maximum of 200 DID numbers. Each DID number can be one through 16 digits,
consisting of 0 through 9 and
• If the same DID number is assigned to different locations, only the number at the lowest
location number becomes available. The others are disregarded.
116
(wild card).
Programming Guide