Isdn Configuration - Panasonic KX-TD1232 Program Manual

[425] ISDN Configuration

Description
Assigns the configuration on an ISDN port basis. This program is available for ISDN
extensions only.
Selection
• Port number:
KX-TD816 — 01 through 04,
KX-TD1232 — 01 through 12,
• Point (point to point) / Multipoint (point to multipoint)
Default
All ports — Multipoint
Programming
1.
Enter 425.
Display: 425 ACCESS MODE
2. Press NEXT.
Display: Port NO?
3.
Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #01:Multipoint
4. Keep pressing SELECT until the desired selection is displayed.
5. Press STORE.
6. To program another port, press NEXT or PREV, or SELECT and the desired port
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, port numbers 01 through 06 are for the Master System and 07 through
12 are for the Slave, if available.
• Refer to program [423] for the list of the ISDN port numbers and their corresponding jack
numbers.
• If one equipment is connected to the ISDN port, select "Point". If multiple equipment are
connected, select "Multipoint".
• To assign all ports to one selection, press the
the contents programmed for Port 01.
Programming Guide
( =all ports)
( =all ports)
key in step 3. In this case, the display shows
General Programming
209