Automatic Hold By Co / Dss Button - Panasonic KX-TD1232 Program Manual
Digital super hybrid system
Hide thumbs
Also See for KX-TD1232:
- User manual (226 pages) ,
- Installation manual (160 pages) ,
- Programming manual (443 pages)
Table of Contents
Advertisement
General Programming
[108] Automatic Hold by CO / DSS Button
Description
Enables or disables automatically holding an outside call when a DSS (Direct Station
Selection) button on the DSS Console or proprietary telephone, or a CO button on a proprietary
telephone is pressed. Through this assignment, each button acts as follows:
—— Pressing the DSS button holds an outside call and quickly transfers it to an extension
without pressing the TRANSFER button.
——Pressing another CO button holds the current outside call.
Selection
• Button: DSS or CO
• Enable / Disable
Default
DSS button — Enable, CO button — Disable
Programming
1.
Enter 108.
Display: 108 AUTO HOLD
2.
Press NEXT to program the DSS button.
Display example: DSS XFER:Enable
3.
Keep pressing SELECT until the desired selection is displayed.
4.
Press NEXT to program the CO button.
Display example: CO Hold :Disable
5.
Keep pressing SELECT until the desired selection is displayed.
6.
Press STORE.
7.
Press END.
Conditions
This assignment applies to all DSS and CO buttons on all DSS Consoles and proprietary
telephones in the system.
Features Guide References
Automatic Hold by CO Button
One-Touch Transfer by DSS Button
70
Programming Guide
Advertisement
Table of Contents
