Outside Line Programming; Outside Line Connection Assignment - Panasonic KX-TD1232 Program Manual

General Programming

2.5 Outside Line Programming

[400] Outside Line Connection Assignment

Description
Used to identify the outside lines which are connected to the system(s). This prevents users
from originating a call to a line which is not connected.
Selection
• Outside line (CO) number:
KX-TD816 — 01 through 08,
KX-TD1232 — 01 through 48, ( =all outside lines)
(25-47: for PRI ISDN line / 25-48: for T1 line)
• Connect / No Connect
Default
All outside lines — Connect
Programming
1.
Enter 400.
Display: 400 CO CONNECT
2.
Press NEXT.
Display: CO Line NO?
3. Enter an outside line number.
To enter outside line number 01, you can also press NEXT.
Display example: CO01:Connect
4. Keep pressing SELECT until the desired selection is displayed.
5. Press STORE.
6. To program another outside line, press NEXT or PREV, or SELECT and the desired
outside line number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, outside lines 01 through 12 are for the Master System and outside
lines 13 through 24 are for the Slave, if available.
• Outside lines 25 through 48 become available for the T1 line when the KX-TD187
expansion unit is installed in the Master System of the KX-TD1232.
168 Programming Guide