Did / Tie Format Number Assignment - Panasonic KX-TD1232 Program Manual

[430] DID / TIE Format Number Assignment

Description
Assigns a Direct Inward Dialing (DID) and TIE format number to each outside line group.
Selection
• Outside line group (TRG) number:
1 through 8,
• DID / TIE format number:
1 to 8
Default
All outside line groups — Not stored
Programming
1. Enter 430.
Display: 430 MODIFY FORM
2.
Press NEXT.
Display: TRK GRP NO?
3.
Enter an outside line group number.
To enter outside line group number 1, you can also press NEXT.
Display example: TRG1:Not Stored
4.
Enter a DID / TIE format number.
To change the current entry, press CLEAR and enter the new number.
5. Press STORE.
6. To program another outside line group, press NEXT or PREV, or SELECT and the desired
outside line group number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
This is the first and basic programming for the DID / TIE feature. If this assignment is changed,
it will affect other programming ([431] through [435]).
Features Guide References
Direct Inward Dialing (DID)
T1 Line
TIE Line Service
Programming Guide
( =all outside line groups)
General Programming
219