Account Codes - Panasonic KX-TD1232 Program Manual

General Programming

[105] Account Codes

Description
Assigns the account codes for Account Code Entry, Verified — All Calls and Verified — Toll
Restriction Override modes. If Verified — All Calls is assigned in program [508] Account
Code Entry Mode, an account code is required to make an outside call. If Verified — Toll
Restriction Override is assigned, an account code is only required for a toll call and overrides
toll restriction.
Selection
• Location number: 001 through 128
• Account code: 10 digits (max.)
Default
All locations — Not stored
Programming
1. Enter 105.
Display: 105 ACCT CODES
2.
Press NEXT.
Display: Location NO?
3.
Enter a location number.
To enter location number 001, you can also press NEXT.
Display example: 001:Not Stored
4.
Enter an account code.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new account code.
5. Press STORE.
6. To program another location, press NEXT or PREV, or SELECT and the desired location
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• Each verifiable account code has a maximum of 10 digits, consisting of 0 through 9.
• Program [508] Account Code Entry Mode is used to select the Account Code Entry mode.
• Account codes having "99" in any part or ending with "9" are invalid, as "99" is used as a
delimiter when entering an account code.
64 Programming Guide