Panasonic KX-TD1232 Program Manual page 275

9.
Press END.
Conditions
• An extension can be assigned as the destination of as many outside lines as required.
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available. Jack numbers in the out-of-service system are
unacceptable.
• For an explanation of jack numbering, see "Rotation of jack number" in Section
1.3 Programming Methods.
• To assign all jacks or all outside lines to one selection, press the
In these cases, the display shows the contents programmed for Jack 01 or for outside line 01.
• There are six notification methods:
a)
Immediate ringing: rings immediately
b)
1 ring delay
c)
3 ring delay
d)
6 ring delay
e)
No ring: only the indicator flashes
f)
Disable: no incoming call
• When you change the jack number by pressing NEXT or PREV, the outside line number is
not changed. Example #03-1:CO06.....Press NEXT.....#03-2:CO06
Features Guide References
Direct In Lines (DIL)
Night Service
Ringing, Delayed
Programming Guide
General Programming
key in step 3 or step 4.
275