Pause Time - Panasonic KX-TD1232 Program Manual

General Programming

[412] Pause Time

Description
Assigns the length of the pause time. The programmed pause time is automatically inserted
after a line access code or a host PBX access code programmed in program [411] Host PBX
Access Codes or manually inserted if the PAUSE button is pressed by the user.
Selection
• Outside line group (TRG) number:
1 through 8,
( =all outside line groups)
• Time (seconds):
1.5 / 2.5 / 3.5 / 4.5
Default
All outside line groups — 1.5 sec
Programming
1.
Enter 412.
Display: 412 PAUSE TIME
2.
Press NEXT.
Display: TRK GRP NO?
3. Enter an outside line group number.
To enter outside line group number 1, you can also press NEXT.
Display example: TRG1:1.5sec
4.
Keep pressing SELECT until the desired time is displayed.
5. Press STORE.
6. To program another outside line group, press NEXT or PREV, or SELECT and the desired
outside line group number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• To assign all outside line groups to one selection, press the
display shows the contents programmed for outside line group 1.
• Program [401] Outside Line Group Assignment is used to assign each outside line to an
outside line group.
188
key in step 3. In this case, the
Programming Guide