Tie-To-Co Transfer - Panasonic KX-TD1232 Program Manual

[437] TIE-to-CO Transfer

Description
Enables or disables transferring TIE calls to an outside line on an outside line group basis. This
restriction applies to the following: 1) An outside call through another PBX 2) Call Forwarding
to an outside line 3) Call Transfer to an outside line.
Selection
• Outside line group (TRG) number:
1 through 8,
• Enable / Disable
Default
All outside line groups — Disable
Programming
1.
Enter 437.
Display: 437 TIE-CO XFER
2. Press NEXT.
Display: TRK GRP NO?
3.
Enter an outside line group number.
To enter outside line group number 1, you can also press NEXT.
Display example: TRG1:Disable
4. Keep pressing SELECT until the desired selection is displayed.
5. Press STORE.
6. To program another outside line group, press NEXT or PREV, or SELECT and the desired
outside line group number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
None
Features Guide References
T1 Line
TIE Line Service
Programming Guide
( =all outside line groups)
General Programming
231