Timer Programming; Hold Recall Time - Panasonic KX-TD1232 Program Manual

General Programming

2.3 Timer Programming

[200] Hold Recall Time

Description
Assigns the length of the hold recall timer. This timer is used to alert an extension that a call
has been held for an extended period of time.
Selection
Time (seconds): 0 through 240 (0=Hold Recall disabled)
Default
60 sec
Programming
1.
Enter 200.
Display: 200 HOLD RECALL
2.
Press NEXT.
Display example: Time: 60 sec
3.
Enter the time.
To change the current entry, press CLEAR and enter the new time.
4. Press STORE.
5.
Press END.
Conditions
• Select "0" if Hold Recall is not required.
• You cannot leave the entry empty.
Features Guide References
Hold Recall
126 Programming Guide