Extension Programming; Extra Device Port - Panasonic KX-TD816 Installation Manual

4.8

Extension Programming

Description
Selection
Default
Programming
Conditions
Feature References

EXtra Device Port

EXtra Device Port (XDP) allows a single line telephone (SLT) to be
connected to the same jack as a digital proprietary telephone
(DPT). This program assigns which jacks are XDP. The SLT and
DPT of the programmed jack work as independent extensions.
• Jack number: KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
• Disable / Enable
All jacks – Disable
1. Enter 600.
Display: XDP Assign
2. Press NEXT.
Display: Jack NO?->
3. Enter a jack number.
To enter jack number 01, you can also press NEXT.
Display example: #01:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
• The eXtra Device Port feature must be assigned "Disable" for DSS
ports.
• In the case of KX-TD1232, jack numbers 01 through 32 are for the
Master System and 33 through 64 are for the Slave, if available.
• To assign all jacks to one selection, press the
case, the display shows the contents programmed for Jack 01.
• Immediately after changing your assignment, the changed setting may
not work for a maximum of eight seconds.
Section 3, Features,
EXtra Device Port (XDP)
( =all jacks)
( =all jacks)
key at step 3. In this
System Programming
600
4-101