Button, Group-Co (G-Co) - Panasonic KX-TD816NE Features Manual

Button, Group-CO (G-CO)

Description
To support efficient utilisation of CO lines, a group of CO lines (CO line group) can be assigned
to a CO button. This assignment is referred as to Group-CO (G-CO). Any incoming call from
any CO line in the CO line group arrives at the G-CO button. To make a CO call, the user can
access an idle CO line in the group by simply pressing the dedicated G-CO button.
Conditions
• No G-CO button is originally provided on a proprietary telephone (PT). It is programmable
on a CO button by either System or Station Programming.
• It is needed to programme the extension for receiving and / or originating calls on CO lines.
• It is possible to assign the same CO line group to more than one G-CO buttons on the same
PT.
• It is possible to assign the same line to an S-CO button and to a G-CO button.
• Immediate, delayed, no ringing or no incoming call (disable) can be selected on an
extension-CO line basis.
• The PT user can choose a desired ringer frequency for each G-CO button by System or
Station Programming.
Programming Guide References
• [005] Flexible CO Button Assignment
• [400] CO Line Connection Assignment
• [401] CO Line Group Assignment
• [603-604] DIL 1:N Extension and Delayed Ringing — Day / Night
• [605-606] Outgoing Permitted CO Line Assignment — Day / Night
Features Guide References
• Answering, Direct CO Line
• CO Line Group
• Line Access, CO Line Group
• Line Access, Direct
• Ringing Tone Selection for CO Buttons
User Manual References
• 2.2.1 Basic Calling
• 2.3.1 Answering Calls
• 4.1.3 Customising the Buttons
Features Guide
1.1 General Features
35