Networking Features; Tie Line Service - Panasonic KX-NCP500 Features Manual

1.30 Networking Features

1.30.1 TIE Line Service

Description
A TIE line is a privately leased communication line between two or more PBXs, which provides cost effective
communications between company members at different locations.
Interface
The following interfaces can be used to establish a private network:
Interface
E & M
T1 (TIE [E & M])
E1 (E & M)
BRI/PRI (QSIG)
VoIP
The available interfaces depend on the cards installed in the PBX.
® 3.33 [1-1] Slot—Port Property - BRI Port—Network Numbering Plan—
® 3.35 [1-1] Slot—Port Property - PRI Port—Network Numbering Plan—
® 3.38 [1-1] Slot—Port Property - T1 Port—
® 3.44 [1-1] Slot—Port Property - E1 Port—
® 3.47 [1-1] Slot—Port Property - EM Port (KX-TDE series only)—
Feature Guide References
1.1.1.6 Intercept Routing
1.3.1.2 Call Forwarding (FWD)
1.9.1 Toll Restriction (TRS)/Call Barring (Barring)
1.10.1 Automatic Route Selection (ARS)
1.12.1 Call Transfer
1.17.6 Direct Inward System Access (DISA)
2.3.6 Flexible Numbering/Fixed Numbering
3.1 Capacity of System Resources
User Manual References
1.2.1 Basic Calling
Analogue
Digital (64 kbps ´ 24 channels)
Digital (64 kbps ´ 30 channels)
Digital (ISDN 2B+D/30B+D/23B+D)
Internet Protocol (IP)
Trunk Property
Trunk Property
Network Type
Trunk Property
Trunk Property
Trunk Property
1.30.1 TIE Line Service
Feature Guide 341