Roland VersaCamm SP-540V Service Notes page 96

Fix the FLEXIBLE CABLE with the CABLE HOLDER with
16
keeping the condition of 15 .
Fix the FLEXIBLE CABLE with the other CABLE
17
HOLDER.
Fix the CABLE HOLDER with pulling the
FLEXIBLE CABLE not to have the slack
between the 2 CABLE HOLDERs.
Fix the TOOL CARRIAGE BOARD to the TOOL
18
CARRIAGE, and connect the 3 cables.
. P ut the ENCODER SCALE in between the ENCODER
19
PLATE and the GUIDE RAIL.
Then, fix the right end with the PLATE and hook up the
SPRING on the left end.
Make sure that the ENCODER SCALE is in place.
Do not loosen or tighten the screws fixing the
ENCODER PLATE.
SPRING
3-51
CABLE HOLDER
CABLE HOLDER
TOOL CARRIAGE BOARD
CABLE
ENCODER SCALE
ENCODER PLATE
PLATE