Table of Contents
Advertisement
[F/W installation when the Main Board is replaced]
Make sure the MAIN POWER SW is OFF and then
1
turn on the MAIN POWER SW again while pressing
[
], [
] and [
] keys.
Or since [SUM ERROR] is displayed when the MAIN
POWER SW is turned on, [WAITING] is displayed on
the LCD if the [ENTER] key is pressed at that time.
Press [ENTER] to excute the installation.
2
Send the firmware using the Peck.
3
[
], [
], [
VERSION UP SURE?
4-19
] + MAIN POWER ON
4
Hide quick links:
Advertisement
Table of Contents
